|
- KUBOTA Diesel Engine
- Blue Molded Silicone Hoses
- Multiple Cylinders for Smooth Operation with Minimum Vibration
- Three Vortex Combustion System to Reduce Noise, Lower Emissions, & Increase Fuel Economy
- Glow Plugs for Cold Weather Starting
- Z-F Industries / Hurth Marine Gear
- Fresh Water Cooling System
- Integral “Cupro-Nickel” Removable
Heat Exchanger Core
- “Phosphor Bronze” Heat Exchanger
End Caps
- Gear Driven Camshaft and Oil Pump
- Direct Driven Flange Mounted Raw
Water Pump
- 316L - Stainless Steel Exhaust Outlet
- Heavy Duty Modular Frame Rails
- Flexible Vibration Isolators, Adjustable, Fully Captive
- Air Intake Cleaner/Silencer
- 12V Electric Starting System - High Output Gear Reduction
- 12V 40Amp Charging System with Internal Regulation
- Key Switch Start - Lockable
- Energize to Stop Solenoid - Push Button
- Forged Brass Oil Drain Valve with Safety Lock
- Mechanical Fuel Transfer Pump
- Audible/Visual Alarm for High Coolant Temp / Low Oil Pressure
- Zinc Anode in Heat Exchanger
- Remote Start Panel with Key Switch Start, Safety Alarm & Push Button Stop
- Acrylic Enamel “Silver” Finish
- Secondary 5Micron Spin-On Fuel Filter
- Full-Flow Spin-On Lube Oil Filter
- Non-Corrosive Tinned Engine Wiring
|
|
|
 |
|
- Balmar 85 Amp Model 70-80 Alternator
-
Various Regulators Available Depending upon Application
-
DELUXE Engine Gauge Panel with with Electronic Tachometer, Oil Pressure Gauge, Water Temp. Gauge, Voltmeter, Hourmeter and Keyswitch Stop/Start Control
-
Z-F Industries / Hurth Down Angle and V - Drive Gears
-
Flexible Output Couplings
-
12 Volt Electric Oil Change System
-
KEEL Cooling System
-
Dual Groove Front Pulley for Auxiliary Power
-
Remote Oil Filter Kits
-
Hourmeter with Change Interval Indicator
-
Awlgrip Paint Finish - Various Colors
|
Specifications |
| Kubota Model |
V1505E |
| Number of Cylinders |
4 |
| Configuration |
4 Stroke, Vertical, Indirect Injected, Water Cooled |
| Bore/Stroke inches |
3.07” x 3.09” |
| Bore/Stroke mm |
78 x 78.4mm |
| Displacement cu. in |
91.44 cu. in. |
| Displacement cu. cm |
1496cc |
| Gross BHP @ 3,000RPM |
37 |
| Starting System |
12 VDC High Output Gear Reduction |
| Charging System |
12VDC/40Amp - Internally Regulated |
| Combustion System |
E-TVCS, 3 Vortex Pre-Combustion Chamber Design |
| Cooling System |
Fresh Water Heat Exchanger w/ Direct Driven Raw Water Pump |
| Lubrication System |
Forced Lubrication with Trochoid Gear Driven Pump |
| Reduction Trans. |
Z-F Industries / Hurth Model HBW-100 Standard Ratio 1.79 to 1 |
| Dimensions in. LxWxH |
34.5 x 17.5 x 25 |
| Weight / Dry |
354lbs. |
|
